Application: The QP-CQP series pneumatic caliper disc brake is widely used for parking or deceleration braking of small and medium-sized driving mechanisms. The tension braking of the winding mechanism, such as the tension control of the paper roll in the paper mill, the tension control of the information paper during information printing, the unfolding tension of the steel plate (steel wire) roll, and the tension control of the wire and cable laying and cable laying
Compliance with standards:
The technical requirements of the caliper disc brake comply with the JB/T10917-2008 standard.
Main features:
▲ The QP series pneumatic caliper disc brake is a normally closed design: spring brake, pneumatic release (opening); The CQP series is a normally open design: air pressure braking, spring release, braking force can change with the change of air pressure, and can be flexibly changed according to needs during use
▲ Compact structure, small size, sensitive movement, light weight, and convenient use
▲ Card mounted asbestos free brake pads, green and environmentally friendly (based on actual reports), easy and fast replacementInstallation method: Suitable for horizontal or vertical axis braking. When using the horizontal axis braking method, it is possible to install it at any angle around the brake disc, but it is better to install it horizontally; When using the vertical axis braking method, the angle is not limited. A brake disc can be equipped with one brake or two or more brakes, but it is recommended to install two or more brakes symmetrically as much as possible▲ All power sources do not need to be set separately and can be connected to existing air compression stations for grid use. Speed regulating valves are installed in the gas supply line, and the braking time can be adjusted infinitely
Working conditions:
◆ Environmental temperature: -20 ° C~+40 ° C
◆ Working pressure: 7 bar◆ Gas source requirements: The compressed air introduced into the air bag should be dry, clean, and free from corrosive gasesWhen there are special requirements, they should be negotiated and determined during the ordering process
QP-CQP series pneumatic caliper disc brake applications and main features:
Used for braking and deceleration of various mechanisms in lifting, transportation, metallurgy, mining, port, construction and other machinery.
The QP series features spring brakes and pneumatic releaseThe CQP series is pneumatic braking with spring releaseThe overall structure is simple, small in size, and lightweightAsbestos free brake pads, green and environmentally friendly (based on actual reports)
The brake pad is easy to adjust after wear
Each type of disc diameter in the QP series can be adjusted for four levels of braking torqueAll power sources do not need to be set separately and can be connected to existing air compression stations for grid use. Speed regulating valves are installed in the gas supply line, and the braking time can be infinitely adjustedThe installation of brake pads adopts a spring clamp type, which is convenient and fast to replaceThe main models include: QP12.7-A QP12.7-B CQP12.7-A CQP12.7-B QP12.7-C QPN12.7-C QPN12.7-A QPN12.7-B CQPL12.7-B CQPL12.7l-A CQPL12.7l-B CQP20-D
