Main features: The QP series features spring braking and pneumatic release, while the CQP series features pneumatic braking and spring release
The overall structure is simple, small in size, and lightweightAsbestos free brake pads, green and environmentally friendly (based on actual reports)The installation of the brake pad adopts a spring clamp type, which has good performance, convenient and fast replacement
· The brake pad is easy to adjust after being worn
Each disc diameter of the QP series brake can be adjusted for four levels of braking torqueAll power sources do not need to be set separately and can be connected to existing air compression stations for grid use. Speed regulating valves are installed in the gas supply line, and the braking time can be adjusted infinitely
Usage conditions
· Environmental temperature: -5 ℃~+40 ℃
· Working pressure: QP series is 5-7 bar, CQP series is ≤ 7 bar.
Outdoor rain and snow erosion or corrosive gases and media should use anti-corrosion (based on actual reports) productsThe air source should not contain oil, water, or other impuritiesThe CQP series B-type pneumatic caliper disc brake is widely used for parking and deceleration braking of various mechanisms in machinery such as lifting, transportation, metallurgy, mining, ports, docks, and construction
Installation of CQP series B-type pneumatic caliper disc brake
1. First, check for oil sludge or other stains on the brake surface of the brake disc and brake pad.
2. Install the G3/8 "(cast iron rod cylinder) or 1/2" (cast aluminum cylinder) connector on the air inlet of cylinder 1, connect the air pipe with a hose, and the air source should be free of oil, water, and other impurities3. When installing, first introduce pressure air to retract piston rod 5 into the cylinder, then install friction block 12 into the brake disc in the direction perpendicular to the brake disc, and then fix base 9 horizontally on the rigid base, so that its center is in line with the center of the brake disc thickness
