YW series electric hydraulic drum brake product introduction:
YW series electric hydraulic drum brake is widely used for deceleration or parking brake of mechanical drive devices such as lifting, transportation, metallurgy, mining, ports, docks, construction machinery, etc
Compliance with standards:
The installation dimensions of the YW series electric hydraulic drum brake comply with DIN15435 and JB/T7021-2006 standards, and the technical requirements comply with JB6406-2006 standards.
Main features: The main swing hinge points are equipped with self-lubricating bearings, which have good transmission efficiency and do not require lubrication during useThe main performance is good, with smooth braking and high frequency of actionThe automatic compensation device can achieve automatic compensation when the brake pad is wornManually release the brake, convenient for maintenanceEquipped with a chain type equal clearance device, it always maintains equal clearance between the two side tiles during use, avoiding the phenomenon of one side brake pad floating against the brake wheel due to uneven clearanceThe brake spring is arranged inside the spring tube and is equipped with a brake torque scale on one side for easy and intuitive adjustmentThe asbestos free brake pads and brake pads adopt a card insertion type, which has good performance and is easy and fast to replace
Usage conditions:
Environmental temperature -20 ℃~+50 ℃
Relative humidity: should not exceed 90%
There must be no flammable, explosive, or corrosive gases in the surrounding working environmentThe altitude of the usage site complies with GB755-2000Outdoor rain and snow erosion or corrosive gases and media should use anti-corrosion (based on actual reports) products
