WGP type drum gear coupling with brake disc is a coupling composed of inner gear rings with the same number of teeth and flange half couplings with outer teeth. It is suitable for connecting two horizontal coaxial transmission shaft systems, with a brake disc diameter of 315-1000mm and a nominal torque transmission of 710-16000N. m
The WGP type drum tooth coupling with brake discs is composed of internal gear rings with the same number of teeth and flange half couplings with external teeth. The external teeth are divided into two types of tooth shapes: straight teeth and drum teeth. The so-called drum teeth refer to the spherical shape of the external teeth, with the center of the spherical surface on the gear axis. The tooth side clearance is larger than that of ordinary gears. The drum tooth coupling can allow for larger angular displacement (relative to the straight tooth coupling), which can effectively improve the contact conditions of the main teeth, improve the ability to transmit torque, and extend the service life. The contact state along the tooth width when there is angular displacement. This coupling is suitable for connecting two horizontal coaxial transmission shaft systems, with a brake disc diameter of 315-1000mm and transmitting a nominal torque of 710-16000N. m
Basic performance parameters and main dimensions of WGP type drum gear coupling with brake discs mm
nominal torque Tn: 710N. m
allowable speed n: 4000r/min
shaft hole diameter: 12, 14, 16, 18, 19, 20, 22, 24, 25, 28, 30, 32, 35, 38, 40, 42
shaft hole length: Y: 32, 42, 52, 62, 82, 112mm.
, J1Z1:44, 60, 84
Brake disc: D0:315mm
Large outer diameter D: 122mm
Moment of inertia: 0.007kg. ㎡
Total lubricating grease: 0.11kg
